Skip to main content
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

2012 Ford Mustang Boss 302 - Back at the track!



A few weeks ago, I took my car - a 2012 Mustang Boss 302 - to the track for the first time this summer. Head to 2012 Ford Mustang Boss 302 - Doing what it does best! to find out what modifications I made and how I liked it last summer, stock, and how I like it so far this summer after modifications!

This time, I'm back at the track with the local BMW club - BMW Club Atlantic - for a high performance driving school (HPDS) that I attend annually. The school is arranged twice a year and each time, it runs for an entire weekend. Each day, there are 2 sessions of slaloms and accident avoidance exercises and 2 lapping sessions for a total of 8 sessions on the track. Classroom sessions that go for 15 to 30 minutes run between each track session where vehicle dynamics and track etiquette are discussed. It is a very comprehensive school and between the 1-on-1 instructor time and classroom sessions, there's a lot to be learned for those who are trying to improve. If you're looking to get into racing, it won't be enough because they don't teach the fastest lines or brake points but it is a very good place to start. As one of the senior instructors put it: "We don't teach you how to play hockey. We teach you how to skate." Yes, we are Canadian! Where else could you find a hockey analogy on a race track?

Now back to the car. I have made no additional modifications. The engine is still stock, with the exception of one reliability modification, an oil catch can. I swapped the stock clutch-based limited slip differential with a Ford Racing Torsen unit that has a torque bias ratio of 2.7 - the same one that comes stock on the Boss 302 Laguna Seca. The stock pan hard bar is gone in favour of a Fays2 Watt's link to better control rear axle movement. Rounding off the modifications are lightweight, rotary forged 18" x 9.5" TSW Nurburgring wheels wrapped in 285/35 rubber at all four corners that replace the stock 19" x 9" front wheels and 19" x 9.5" rear wheels (stock tire sizes are 255/40 front and 285/35 rear).

The improved agility is even more noticeable at the BMW club event because it includes some slalom exercises before track sessions. Many find the slalom exercises boring and some even consider it to be a waste of time. I actually like the slalom sessions because, over time, they helped me be more smooth and precise with my right foot and throttle application.



Throughout the weekend, transitions became smoother and apexes were more seldom missed. That's one of the benefits of continuing to go to a school after getting the basics. I find that progress at a track day is slower than progress at a HPDS. The presence of a second set of eyes - your instructor - accelerates the learning curve, especially considering that they're more experienced than you are and often with racing experience. One thing I have been struggling with, though, is the entry of corner 2. By the end of the front straight between, corner 11 and corner 1, you're either in 3rd or 4th gear, depending on the car. Corner 1 can be taken in 4 or 3, again depending on the car. The only constant is that corner 2 is taken in 2nd gear. I don't remember talking to anyone who takes corner 2 in 1st gear or anything higher than gear 2 (unless it's a cool down lap). I knew I didn't have the smoothest heel-and-toe downshift but I couldn't quite put my finger on the reason why. My instructor could, though.

He noticed that my downshift is done in 2 steps: step 1 is clutch pedal down and throttle blip and step 2 is moving the shifter. He said I should try making it all a 1 step event. I tried that and it helped make the downshift much smoother, helping the car be more settled going into the corner. I don't know if that will work for everyone but it certainly worked for me.

One issue came up on the track, though. A few times, steering weight changed significantly as if power steering stopped working and it felt like the steering wheel was being tugged in the opposite direction. When the issue came up, it lasted for less than a second. At first I thought that stability control may not be full defeat-able, although it should be on the Boss 302. I thought it may be trying to correct my steering angle or heavily applying the brakes on one side but whenever it happened, there was no loss of traction so stability control shouldn't even intervene. Plus, I've had stability control kick in before in different cars and it did not feel that way. I was finally assured that it was a problem when "Service AdvanceTrac" came on. I will get the car checked at the dealership as soon as I'm back.

Aside from that minor hiccup, the car held itself on the track like a champ, as usual. Loads of fun and grin-inducing attitude. Hopefully, the issue will be fixed before the next lapping day on July 1st. Check back for more updates!


Comments

  1. You’re getting off to a good start. Disappointing that your car had to encounter a problem. But in my opinion, it’s an advantage for you. Since you found out the problem immediately, you were able to fix the problem by sending it to the repair center. I hope it works well now! -- Joellen Cirilo @ YoungsCollision.com

    ReplyDelete
    Replies
    1. Thanks Joellen. It turned out to not be a malfunction - more about that in the post about the car.

      Delete

Post a Comment







Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

Falken Azenis RT615k+ Street and Track Review

Last year, I picked up a 2009 Lancer Ralliart to do a long term test with it as a dual duty track/daily. One of the first things I knew I was going to do was put a decent set of tires on it. The car came without OEM wheels which was actually good because I didn't have to hesitate about getting a good set of aftermarket wheels to support going wider. Thankfully, my friends at YST Auto Halifax  set me up with a great set of Superspeed RF03RR wheels. The Wheels I had never even heard of Superspeed but I trusted the good folk at YST Auto who mentioned some customer cars running on track with them. These wheels are rotary forged which is basically a prerequisite to be taken seriously in this market populated by companies like TSW and Fast Wheels. The wheels looked like a high quality, well finished wheel and each had a "QC" check sticker on. Just for appearances? Maybe, but I found no defects. The wheels seemed easy to balance (didn't need many weights) and at 18.1 lb. f

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track load

GTR vs Evo X vs STI: which has the best AWD system?

A few weeks ago, I made a post explaining  mainstream AWD system types and how they compare , pros and cons, etc. including some simple diagrams to show where the power goes and how much. As promised, this post will focus on specific cars and what AWD systems they use, especially ones that that have more or less been defined by their AWD systems, and the best place to start may be with a bombshell; the Nissan GT-R. Nissan GT-R (R35) The GT-R has built a reputation around having monster traction and very approachable performance, thanks to its AWD system - Advanced Total Traction Engineering System for All-Terrain (ATTESA) - and what it can do for you. But the GT-R doesn't actually use the most mechanically sophisticated type of AWD systems discussed in the previous article, namely a "true" AWD with a centre differential. Instead, it uses a clutch pack to transfer power. RWD-based clutch-type AWD schematic - Rams Eye The Track Guy © The R32, R33, and R34 Sky

Winter Car Maintenance Tips

It's this time of the year again and I thought I would share a few winter maintenance tips that can be overlooked but they can keep a vehicle running better and more safely. 1- Tires They're the only components that connect your vehicle to the road. Regardless of the capability of a vehicle's drivetrain and suspension or how strong the brakes are, they will handle only as well as the tires allow them to. Always get snow tires and not summer or all season tires if snow stays on the ground. If you only get rain but no snow where you live, all season tires are a great choice. Check tread regularly to make sure the grooves are deep enough. Tires have wear bars which indicate  when the amount of tread left is unsafe for driving. Snow tires have two wear bars; one for dry/wet driving and one for snow driving. If the tread is at the taller wear bar (the snow wear bar), the tires are not safe for snow driving but may still be used in the rain or dry. If the tread reaches the