Rams Eye The Track Guy

I wanted to get an alignment done for this season so I decided to call my friends at ISI Automotive. My car has camber plates so there is a good range of caster and camber adjustment for the front wheels. I already did an alignment when I got the camber plates but my mechanic doesn't deal with alignment varying from factory settings and aftermarket parts of this sort so I called Phil Tuff at ISI Automotive to take it in. Phil is the service manager who runs the shop with Steve Phillips, the owner. They have worked at VW and BMW dealerships for many years and decided it was time to open a shop, but it isn't just a job. Phil has 1981 BMW 320i. Well, it used to be anyway. It is a lot more M3 than 320i now. I always bombard him with questions about the build because I think it will be awesome when done. I asked him to send me details of the build so I will make a separate post about it. In summary, though, the current engine is based on a US spec S14 M3 engine. "

Today started great. My wife planned a great day for us today, being father's day. She and our son made a little gift for my office. We then went to a local wild life park with our son, which he seemed to love. Then we had a picnic. In the evening, though, we had to go to the store to pick up some groceries and life had different plans about ending the day. We were driving home and heard a pop. The car drove normal and there were no other noises after. I figured we hit a piece of plastic or something and we were above to pull up in a few minutes so thought I'd check it then. We stopped at a traffic light and when we pulled up after it went green, I heard and felt the unmistakable noise and vibration of a flat tire. I pull into a parking lot, go to look, and sure enough - the wheel was basically sitting on the asphalt separated by a layer of rubber. The tire was completely flat. My first thought was: "Crap tires!" The tires are Aeolus all season tires. It'

  That's right, as of last weekend, I am officially a rookie race car driver! I have always wanted to race and ever since I started going to our local track for HPDS, lapping days, or time attacks, I became even more serious about it. Last weekend, I took the Race School and was able to get my racing license. The race car? An IT (Improved Touring) 1995 VW GTI race car. The car was prepped and is maintained by the Vantage Motorsports race team and it's a blast to drive, but I'll get into that later. I have expressed interest several times before and last year I have all but committed to Derek Lugar, team owner and Chief Race Instructor for our region (Atlantic Canada). He agreed to let me use the car if I cover the costs and I was absolutely thrilled and proud that he let me use their car. Speaking of which.. The car's power is mostly stock to meet the SCCA IT-B classification rules. I have been told more than once that it makes "108-112 whp" wh

This picture is a little misleading. Unfortunately, this isn't a post about a race on a frozen lake or a snow covered rally stage involving the three hottest AWD hot hatches (the WRX STI only a hatch in spirit). This is about the highly anticipated test recently posted by Car & Driver. First things first, I wish C&D would stop testing 30-50 mph and 50-70 mph in top gear for manual performance cars. They are hugely (almost exclusively) influenced by gearing and are completely irrelevant. I could see them being relevant in a more mainstream class (say, comparing a base Focus manual to a base Cruze manual) because an average buyer may not want to shift. But there is no way the buyer of any of these cars is going to wait over 7 seconds to go from 30-50 or approximately 6 seconds to go from 50-70? Worse yet, why would anyone floor a small 4 cyl turbo in an overdrive gear and lug the engine outside of boost? Now with the rant out of the way, let’s look at numbers.

Car and Driver recently tested a 2016 BMW 328i xDrive. It has good performance numbers (posted here earlier in the ATS4 2.0T post). It seems like a good little car.. until you get to the price. I'm more dumbfounded by the proximity of price to the +BMW  M3 than I am by the price alone. $59k?? One doesn't have to go far to find a much better deal. An +Audi  S4 starts almost $10k under it. I just can't wrap my head around choosing this over an S4. This isn't expensive compared to a mainstream car with comparable performance/options. Both this and the S4 are German, both are AWD, and both are well established luxury brands. I personally put a lot of weight on a RWD-based chassis but this automatic 328i xDrive isn’t exactly a purist’s choice and at 3,700 lbs, it isn’t a featherweight. I would imagine discounts on it would be huge to lure someone away from an S4. That, or you have to be an absolute die-hard BMW fan to buy one.  

The biggest news I found in this test is a huge improvement in power output. Looking back at one of the very early tests of the +Cadillac   ATS with this engine done by Car & Driver was a comparison test back in 2012, the ATS 2.0T was noticeably lacking in power compared to the 328i. Although the older tested cars were very different (i.e. lighter, manual equipped RWD versions) than this Cadillac, Car & Driver recently also tested a 2016 BMW 328i xDrive so we can have an apples-to-apples comparison of this AWD, 4-cyl turbo ATS and an AWD, 4-cyl turbo 328i. In the early test, the numbers were: 2013 Cadillac ATS 2.0T 2012 BMW 328i 0-30 mph 2.0 s 2.0 s 0-60 mph 6.3 s 5.6 s 0-100 mph 16.7 s 14.5 s 0-130 mph 34.7 s 26.4 s 1/4 mile 14.8 s @ 94 mph 14.3 s @ 99 mph 5-60 mph (street start) 7.4 s 6.6 s At the time, the car made 272 hp @ 5

Great short video on ideal seating position, courtesy of +Porsche  . One of the first things I had to learn when I started high performance driving was adjusting the seating position to allow better control. It took some adjusting at first but after getting used to, I could never go back.