Skip to main content
HOME   |   ABOUT   |   NEWS   |   TECH ARTICLES   |   AT THE TRACK   |   REVIEWS   |   VIDEOS   |   CONTACT ME

2016 Ferrari 488GTB - 458 Replacement




I know this isn't a video of a 488GTB but bear with me. This is a video by Motor Trend of a 2010 Ferrari 458 Italia. It shows a very brief review and hot lapping at Mazda Raceway Laguna Seca during the 2011 Best Driver's Car (BDC) feature. Play the video, skip to 0:42 and listen. Once you get to about 1:00, you should rewind back to 0:42 and let it play again to 1:00. I did that a few times. That's what the Ferrari 458 Italia sounds like, with a screaming 4.5 litre V8 that revs all the way to 9,000 rpm, where it produces peak aural pleasure and power. Rev matching downshifts are awesome. What an engine. What a noise. Sadly, the replacement of the Ferrari 458 will almost certainly not sound like that. 




The 488 GTB will replace the 4.5 litre V8 with a 3.9 litre V8 that makes peak power at 8,000 rpm and will probably redline at the same point like the last one, which would mean a drop of 1,000 rpm. A pair of turbochargers ensure what's left of that high pitched noise is muffled and that F1-like noise is guaranteed to go the way of the actual F1 noise when they went turbo. What a shame. Check out a similar video above, this time showing a brief review of a 2012 McLaren MP4-12C and hot lapping at Laguna Seca during the 2012 BDC feature. Skip to about 0:48. That engine is very similar to what Ferrari is doing; almost the exact same size (3.8 litre), V8, twin turbocharged, with a flat-plane crankshaft and revs to over 8,000 rpm. If you want to know what the next Ferrari will sound like, this will probably give you a very good (but disappointing) idea.




It isn't all gloomy, though. The turbos, as always, bring a nice dose of torque. While horsepower gets a healthy 64 hp bump from 597 hp in the 458 Speciale to 661 hp, torque gets a huge 163 lb-ft jump from 398 lb-ft to 561 lb-ft. That torque is available at a low 3,000 rpm as opposed to 6,000 rpm in the 458, once again courtesy of the turbos.




Ferrari quotes a lap time around Fiorano of 1:23.0 which is only 0.5 seconds quicker than the 458 Speciale A. I'm surprised it's that small a difference with more peak power and a lot more power throughout the rpm range but it should also translate to a much wider gap on a longer track. Both cars will get to 62 mph in 3.0 seconds but that's mostly traction limited. As speeds increase, the newfound power starts to show, though, as the 488GTB gets to 124 mph in only 8.3 seconds and eventually tops out at 205 mph vs 9.5 seconds for the 458 with a top speed of "only" 202 mph.




Outside, the car looks like an evolution of the 458. The new car boasts 50% more downforce while reducing drag. Weight distribution stands at 46.5%/53.5% front-to-rear which seems to come closer to the neutral 50%/50% than typical mid engine cars. Ferrari quotes a dry weight of 3,020 lbs which is 22 lbs lighter than they quote for the standard 458 Italia. As is typical of European dry weight stats, though, they are far from street trim. The lightest 458 Italia Car and Driver tested came in at 3,325 lbs in road-ready trim and I suspect the 22 lbs "dry" weight advantage of the 488GTB would disappear is street ready trip after the intercooler is filled and (probably) larger radiator.




Inside, the 488GTB looks very similar to the 458 and stays true to Ferrari's minimalistic and driver-focused styling. There's still no touch screen or column stalks. The steering wheel handles just about everything you would expect column stalks to do, such as lights, wipers, and turn signals, in addition to the damper setting, engine start, and Ferrari’s manettino chassis-control switch.




I'm sure this will still wow reviewers and will probably be an excellent example of the turbocharged breed, delivering linear power delivery and smooth throttle response. Still, when the most track capable Mustang got replaced, (i.e. the Boss 302 getting replaced by the GT350), the new car stayed naturally aspirated and even increased capacity going from a 5.0 litre V8 to a 5.2 litre so there's something to be said for that. But then again, Ford went with a twin-turbo V6 on the halo car, the Ford GT, so maybe we can't blame Ferrari. Either way, I'm looking forward to how well this is received. I suspect the 458 Italia will, one day, become incredibly sought after, being the last screaming, naturally aspirated, mid-engined and non-hybrid Ferrari.


Comments

Post a Comment







Does An Aftermarket Grille Really Increase Airflow?
I put a Saleen S281 grille to the test to answer that question.

Stock Suspension S197 Mustang With Square 305/30/19's
What you need to fit a proper size square tire setup.

How Limited Slip Diffs Make You Faster on Track
What you need to know about how they put power down and pros and cons.

Can Telemetry Explain Schumacher's Talent?
A comparison between Schumacher's and then team mate Herbert's data.






Cayman GT4 Track Review
The first Cayman with proper (911-challenging) power.

Is an EcoBoost Mustang any good on Track?
Two days at the track in a Mustang short 4 cylinders.

2016 BMW M4 DCT Track Review
It's quick (properly quick). But is it fun?

Can a stock Golf Diesel handle a Track Day?
Not your every day track beater.




🔥 Most Visited This Week

Falken Azenis RT615k+ Street and Track Review

Last year, I picked up a 2009 Lancer Ralliart to do a long term test with it as a dual duty track/daily. One of the first things I knew I was going to do was put a decent set of tires on it. The car came without OEM wheels which was actually good because I didn't have to hesitate about getting a good set of aftermarket wheels to support going wider. Thankfully, my friends at YST Auto Halifax  set me up with a great set of Superspeed RF03RR wheels. The Wheels I had never even heard of Superspeed but I trusted the good folk at YST Auto who mentioned some customer cars running on track with them. These wheels are rotary forged which is basically a prerequisite to be taken seriously in this market populated by companies like TSW and Fast Wheels. The wheels looked like a high quality, well finished wheel and each had a "QC" check sticker on. Just for appearances? Maybe, but I found no defects. The wheels seemed easy to balance (didn't need many weights) and at 18.1 lb. f

Michelin Pilot Super Sports vs Firestone Firehawk Indy 500 - Street Review

I've been a huge fan of Michelin PSS tires and exclusively bought them for the Mustang over the last four years. So how did I end up here? This year, I was hugely interested in trying an "R-comp" tire. I had my eyes set on Bridgestone Potenza RE-71R's for two simple reasons: price and reputation. Although not a true "R-comp" tire on paper, it performs like one by the account of every single test and review I've read (down to wear rates...). They seem like they're easily the most affordable (from a big brand) R-comp tire and combine that with a reputation for having tons of grip, it was an easy top contender. I had my concerns, though. For one, I'm told and have read that they are an autox tire, not really designed for high speed, pressure, and temps associated with open track. For another, the Mustang is a heavy car (as far as track cars are concerned) being roughly 3,800 lb. (including driver), which will amplify the unwanted open track load

GTR vs Evo X vs STI: which has the best AWD system?

A few weeks ago, I made a post explaining  mainstream AWD system types and how they compare , pros and cons, etc. including some simple diagrams to show where the power goes and how much. As promised, this post will focus on specific cars and what AWD systems they use, especially ones that that have more or less been defined by their AWD systems, and the best place to start may be with a bombshell; the Nissan GT-R. Nissan GT-R (R35) The GT-R has built a reputation around having monster traction and very approachable performance, thanks to its AWD system - Advanced Total Traction Engineering System for All-Terrain (ATTESA) - and what it can do for you. But the GT-R doesn't actually use the most mechanically sophisticated type of AWD systems discussed in the previous article, namely a "true" AWD with a centre differential. Instead, it uses a clutch pack to transfer power. RWD-based clutch-type AWD schematic - Rams Eye The Track Guy © The R32, R33, and R34 Sky

All Mainstream AWD and 4WD Systems Compared and Explained

Mitsubishi Evo X GSR at Atlantic Motorsport Park - Kevin Doubleday  © If you live in Canada or the US, you'll find that plenty of people hold sacred the terms '4x4' and '4WD' to describe a 'true 4x4', where you have a butch transfer case with a low speed, perhaps a body on frame chassis, and ideally a solid axle or two. I'm not sure how that translates to the rest of the world. My extensive research into the motoring industry in Europe (which exclusively consists of watching Top Gear and The Grand Tour...) concluded that most people across the pond simply refer to any vehicle that is capable of sending any power to all four wheels as a 4WD vehicle, further muddying the waters. Where I grew up, 4x4 was more or less synonymous with 'Jeep' so that's not much help either. However, despite all various systems attempting to do the same sort of thing - distribute power between all four wheels instead of two - not all systems are created equal,